Digital Multimeters
วันจันทร์ที่ 9 พฤษภาคม พ.ศ. 2559
Digital Multimeter
DIGITAL MULTIMETERS (DMMS)
100 Digital Multimeter
No more guessing what range to switch your meter to
the TPI 100 does it automatically!
The new TPI 100 automatically switches between AC
and DC Voltage as well as resistance measurements.
No more guessing what range to switch your meter
to with automatic switching from the TPI 100.
120 Digital Multimeter
Compact, manual ranging, basic DCV 0.5%
accuracy DMM.
The TPI 120 features the safety of CE and
IEC 1010 requirements and UL listing, a
large LCD, Data Hold, a standard rubber
boot, and superior versatility.
122 Digital Multimeter
Compact DMM with adapter range for
optional accessories, 0.5% DCV basic accuracy.
When using the Model 122, press the DATA-H
button at any time on any function or range to
freeze the reading on the LCD display. This
function is very useful when measuring in
locations where the display is difficult to read.
126 Digital Multimeter
Compact autoranging DMM with 0.3% DCV
basic accuracy and 400mA AC/DC range.
The 126 is a hand-held autoranging DMM.
The 126 measures ACV, DCV, ACA, DCA,
Resistance, Diodes and Continuity.
133 Digital Multimeter
Large easy to read display in full size DMM;
1,000 DC volts and 750 AC volts; 0.5%
DCV basic accuracy.
The 133 is a hand-held autoranging DMM.
It features extra large numerals on the LCD,
and Data Hold for all functions and ranges.
The 133 is an affordable choice offering
measurements in all of the basic electrical
functions
135 Digital Multimeter
Full size DMM with capacitance;
1,000 DC volts and 750 AC volts; 0.5% DCV
basic accuracy. The 135 is a hand-held
autoranging DMM. It features extra large
numerals on the LCD, and Data Hold for
all functions and ranges. The 135 is an
affordable choice offering measurements
in all of the basic electrical functions.
153 Digital Multimeter
Full size, autoranging, easy to read, 0.3% DCV
basic accuracy DMM; 1,000 DC volts and 750 AC volt.
The 153 is a hand-held autoranging DMM.
The 153 measures ACV, DCV, ACA, DCA,
Resistance, Diodes and Continuity.
183A Digital Multimeter
True RMS DMM with temperature,
capacitance, duty cycle, & low-pass filter.
The 183A is a hand-held autoranging DMM.
The 183A measures ACV, DCV, ACA, DCA,
Resistance, Frequency, Duty Cycle, Diodes,
Capacitance, Temperature and Continuity.
The meter is also easy to use and built to last.
194 Digital Multimeter
CAT IV 600 ACV, data logging, 0.05% accuracy
, 50,000 count, True RMS DMM with separate
fuse and battery compartment.
The Triple Display 194 is an innovative new
concept in DMM design. The unique display
enables you to view more than one event at a
time. This eliminates the hassle of switching
back and forth to review minimum, maximum
or preset comparative values. The meter is
also easy to use and built to last..
196 Digital Multimeter
0-24 mA output built in for process loop
calibration, 0.05% accuracy, 50,000 counts,
DMM with separate fuse and battery compartment.
The DMM 196 is a hand-held autoranging DMM.
The backlit LCD can display three readings at
one time. In addition to basic function of AC/DC V,
AC/DC A, Ohm, Diode test, continuity,
Capacitance, Frequency, there is the adaptor function.
The DMM 196 also has RS232 output and software
for recording information into a PC.
440 Digital Multimeter
The hand held 440 scope plus features an easy
to use combination of a single input 1 MHz
oscilloscope with True RMS DMM.
The TPI 440 is a hand-held oscilloscope plus
autoranging DMM. The instruments large,
backlit LCD display shows a reading and
waveform simultaneously. In addition to
the standard functions of ACV, DCV, ACA,
DCA, Ω, Diode Test and Continuity Buzzer;
the 440 measures Frequency (Hz),Capacitance,
Logic and Component test functions.
The 440 also has RS232 output and software
for interfacing with a PC is offered as an
optional accessory.
Bliss Services (Thailand) co., ltd.
www.bliss.co.th
021849761-2
ไม่มีความคิดเห็น:
แสดงความคิดเห็น
หน้าแรก
สมัครสมาชิก:
ส่งความคิดเห็น (Atom)
ไม่มีความคิดเห็น:
แสดงความคิดเห็น